do not scale from this print esqt-1xx-xx-xx-x-xxx-xxx-xx position specification -02 thru -50 positions per row (see note 1) -s: single (see -s) -d: double (see -d) -t: triple (see -t & see note 4) -q: quad (see -q) -5: five (see -5 & see note 4) -6: six (see -6 and see note 4) lead style spec -02: use c-79-02-x -03: use c-79-53-x plating specification polarization option -xxx: indicates position (see fig 3, sht 2)(use pk-07) .309 [7.85] min for -s, -d, -q rows .375 [9.53] min for -t, -5 & -6 rows "b" max (see table 2) space option option **-mw: metal washer (see fig.2, sht.2)(5 pos min,30 pos max)(use tmmh-xx-d-xx body n/a on -s row spec) (.090 [2.29] min, .300 [7.62]max tail for -f, -l & -s plating) .090 [2.29] min, .482 [12.24]max tail for -g,& -m plating) -f: flash selective, 3 au / 50 ni min on contact, matte tin on tail. -fm: flash selective, 3 au / 50 ni min on contact, matte tin tail. -l: light selective, 10 au / 50 ni min on contact, matte tin on tail. -lm: light selective, 10 au / 50 ni min on contact, matte tin tail. -g: gold, 20 au/ 50 ni min on contact, 3 au / 50 ni min on tail. -gf: light gold: 15 au / 50 ni min on contact, 3 au / 50 ni min on tail (-02 lead style only). -h: heavy gold: 30 au / 50 ni min on contact, 3 au/ 50 ni min on tail. - s : selective, 30 au / 50 ni min on contact, matte tin on tail. -sm: selective: 30 au / 50ni min on contact, matte tin on tail. -m: medium selective, 20 au/ 50 ni min on contact, matte tin on tail. -mm: medium selective: 20 au / 50 ni min on contact, matte tin on tail. row specification (see table 1) "a" .010[.25] (see table 1) space option -xxx .005[.13] (.309 [7.85] min for -s, -d, -q rows) (.375[9.53] min for -t, -5, & -6 rows) ("b" max) .0197 sq ref (typ) 0.500 [(no of pos x .07874 [ 2.0000]) +.000/-.015 ] .250 6.350 ref 2 max sway (either direction) (typ) c l c-79-xx-xx c bi c .0787 2.000 ref .059 1.50 ref see note 3 tmm-xx-s sqt-xx-s -s ((no of pos x .07874 [2.0000]) + .0117 [.300]) .010 [.25] (no of pos x .07874 [2.0000]) - .07874 [2.0000] ref .07874 2.0000 ref (typ) fig 1 .1575 ref 4.000 .059 1.50 ref see note 3 sqt-xx-d tmm-xx-d -d .236 ref 6.00 .079 ref 2.01 see note 3 sqt-xx-t tmmh-xx-t -t .315 ref 8.000 .059 ref 1.50 see note 3 tmm-xx-q sqt-62-q -q .394 ref 10.00 .079 2.01 ref(typ) see note 3 sqt-xx-5 tmmh-xx-5 -5 .472 12.00 ref .079 2.01 ref(typ) see note 3 sqt-xx-6 tmmh-xx-6 -6 ** -mw option, do not design in. samtec will only support existing business 2/07/02. c bi table 1 lead style "a" "b" -02 .850 [21.59] .800 [20.32] -03 .458 [11.63] .408 [10.36] sheet of unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .x: .1[2.5] .xx: .01 [.3] 2 .xxx: .005 [.13] .xxxx: .0020 [.051] material: elevated sqt assm. by: esqt-1xx-xx-xx-x-xxx-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 10/20/1995 2 1 sheet scale: 2:1 insulator: lcp, ul 94 vo, color: black contact: phos bronze f:\dwg\misc\mktg\esqt-1xx-xx-xx-x-xxx-xxx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322 notes: 1. represents a critical dimension. 2. tooling to be designed to produce up to 61 positions. 3. tmm / tmmh bodies are not to be more than .005 from plane set by sqt body. 4. -xm for t, 5 and 6 row options cannot withstand pb-free reflow processing. 5. max cut flash .020[.51] revision bi
-.005 [.13] space option -xxx +.008 [.20] tmmh-xx-d-xx-xx (below tmmh body) flush to +.008 [.20] max .005 max 0.13 (measure at the tail) 3 max sway detail 'a' scale 6 : 1 detail 'b' scale 6 : 1 .750 19.05 in process 1 .743 18.860 .013 0.318 max in process 2 repress to space option needed in process 3 01 50 -s 01 99 100 02 -d 01 148 150 03 -t -q 01 04 197 200 01 246 250 05 -5 01 295 300 06 -6 sqt-01-mw-t fig 2 ** -mw: metal washer (one per position) (5 pos min, 30 pos max) ** -mw option, do not design in. samtec will only support existing business 2/07/02. fig 3 polarization option location insert pk-07-n into specified position and break off tab note: 1. minimum contact retention: 0.5 lb per pin. -02 style only sheet of elevated sqt assm. by: esqt-1xx-xx-xx-x-xxx-xxx-xx dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing purvis 10/20/1995 2 2 sheet scale: 2:1 revision bi f:\dwg\misc\mktg\esqt-1xx-xx-xx-x-xxx-xxx-xx-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail info@samtec.com code 55322
|
